Peltier
Cooler,Device,Module,Fujitaka

●Long life achieved by our GL module to absorb the thermal stress
●Dimensions(mm)/W70×D70×H27
●Motive power source: DC12V 5A
●Cooling capacity:41W
●Design: Cold side- Aluminum plate
●Design: Hot side-Aluminum plate
●Various options available

●Dimensions (mm): W104.5xD80xH44.9
●FEC-1715NP got ten times longer durableness than previous assemblies by installation of our high reliable module.
●FEC-1715NP has got light by our original design.
●We can provide FEC-1715NP at lower price than previous assemblies.
●Resin jacket improves their tolerance against damp and shock.
●Necessary to attach our fan-cover to fix fan to FEC-1715NP.

●Combined the assemblies for dehumidification, power supply and radiator fan all together inside of the dehumidifier
● FHC-03JEX got ten times longer durableness than previous assemblies by installation of our high reliable module.
●Possible to change fixing pitch by 3 steps as you need with the adjuster attached as a standard part.
●Possible to put a pipe easily to the dehumidifier with the joint attached as a standard part.
●You can check the gas temperature, when you connect it to a monitor from the terminal block on it.

●Temperature control and power source base combined.
●Includes exclusive relay harness and AC cord.
●Can regulate modules or units from 0℃ to 50℃.
●Temperature selection possible in increments of 0.1℃.
●High performance. Accuracy within ± (0.5% + 1 digit).
●High output. Maximum power output is 150W.
●Exclusive resistors also available. (Optional, sold separately).

●Dimensions (mm) ／W126xD162.5xH105.5
●External air humidity／2℃-40℃
●Inlet gas temperature／2℃-40℃
●Inlet gas dew point／up to 40℃
●Inlet gas flow／up to 1.5L／min
●Usable gases／gases not damaging to glass
●Supply voltage／single phase AC 100V (50／60 Hz).
●Cooling capability／outlet dew point = inlet dew point -5℃. (provided inlet gas dew point is above 20℃).

●Characteristics ／ΔTmax45℃／Qmax36W
●Carries 1x peltier element FPH1-12708.
●Drive power／DC12V　7A
●Radiation method／ Forced air cooling by DC fan motor.
●Dimensions (mm)／W100xD126xH107.8
●Dimensions of cooling plate (mm)／ 80x55